The FAXJ-1000 is a 4 device (4 port) dual function voice, modem or fax switch.

The FAXJ-1000 is a versatile phone/data/fax switch. It automatically routes calls via fax CNG tone, central office distinctive ring, or touch tones included in the dial string by the calling party. The FAXJ-1000 offers full manual transfer capabilities.

The Internal Call mode (intercom) lets you create an “internal” call from one port of the FAXJ-1000 to any other port.

The FAXJ-1000 stores and retransmits caller ID information so that it is truly caller ID compatible.

The FAXJ-1000 lets you have up to 4 distinctive ring numbers or 1 number for up to 4 phone connected devices or a combination of both on one line for the phone(s), fax, answering machine, modem or any device(s) that you choose.

Internet Power Stone (IP Power Stone 4000): A versatile AC power controller that provides reset capability to unattended equipment. Supports 120 or 240 VAC and is internationally compatible. Works with the ICM for in-band network control but also can be activated via telephone for out-of-band network control. Free Automatic PC heartbeat software available. Local control by RS-232.

The Internet Power Stone is a versatile remote power controller that provides reset capability to unattended equipment. Supports 120 or 240 VAC and is internationally compatible.

Works with in-band network control but also can be activated via telephone for out-of-band network control. Automatic heartbeat software available. Local control by RS-232

POPULAR APPLICATIONS

You can’t afford to wait until the next morning to find out a router has been down all night. Downtime is not an option. Truck–rolls are expensive. Paying field support techs just to power cycle remote equipment is costly and time consuming.

With an increasing number of remote devices deployed within wide area networks, companies need affordable, user-friendly reboot solutions.

Multi-Link’s remote power controllers help IT administrators improve device uptime, decrease problem response time, extend equipment life, and save travel, labor, & fuel costs. The Power Stone and IP Power Stone 4000 give IT departments multiple control options by internet browser, phone, auto fault detection, and daily event scheduling. Affordable yet invaluable, Multi-Link puts remote networks back in your control!

Powerful Benefits

• Eliminate Costly On-Site Visits – Reboot remote equipment as first step in troubleshooting
• Reduce Downtime – Restore/Reset power to remote devices in minutes instead of hours
• Control Power Consumption – Save energy by turning equipment off when not in use
• Instant R.O.I. - Pays for itself with one saved service visit

The C-1000B Line Concentrator 3 to 1 allows up to 3 separate C.O. lines to connect to one telecom device.

On incoming calls, each of the three lines can ring one specific device.

The C-1000B Line Concentrator is reliable and compatible! Manufactured to strict standards in the USA.

The C-1000B Line Concentrator is compatible with virtually all analog phones lines, communications equipment and phone systems.

The Multi-Link Polnet ACP-300 is a 3 device (3 ports) single function industrial automatic call processor. It routes incoming routes calls automatically to voice, fax or modem devices on one line.

It is typically used for modem applications and offers special modem polling features as well as emergency barge-in (call interrupt) which allows one device to have priority access over any other device.

Programmable security access codes insure that the Polnet ACP-300 keeps your information safe from unwanted callers or hackers.

Use the Polnet ACP-300 with any type of modem, regardless of speed, throughput or standard, and type of data terminal.

The Multi-Link Polnet ACP-500 is a 5 device (5 ports) single function industrial automatic call processor. It routes incoming routes calls automatically to voice, fax or modem devices on one line.

It is typically used for modem applications and offers special modem polling features as well as emergency barge-in (call interrupt) which allows one device to have priority access over any other device.

Programmable security access codes insure that the Polnet ACP-300 keeps your information safe from unwanted callers or hackers.

Use the Polnet ACP-500 with any type of modem, regardless of speed, throughput or standard, and type of data terminal.

The Multi-Link Polnet ACP-900 is a 9 device (9 ports) single function industrial automatic call processor. It routes incoming routes calls automatically to voice, fax or modem devices on one line.

It is typically used for modem applications and offers special modem polling features as well as emergency barge-in (call interrupt) which allows one device to have priority access over any other device.

Programmable security access codes insure that the Polnet ACP-300 keeps your information safe from unwanted callers or hackers.

Use the Polnet ACP-900 with any type of modem, regardless of speed, throughput or standard, and type of data terminal.

DESCRIPTION
The Power Stone^® is a call-activated AC power controller for rebooting and powering up/down off-site computers and other devices by phone.

The Power Stone passively monitors the phone line and does not actively "interface" with any equipment connected to the phone line.

The feature-rich power controller offers you a wide variety of operating modes to fit your specific application. Control power to connected equipment "Automatically" using one of three Automatic Operating Modes. Or control power "Passively" until you call in and input your security access code to direct functions using touch tone commands.

1997 Governor's New Product Award

The Multi-Link SR-3 Distinctive Ring Call Processor is simple, accurate and dependable. The SR-3 gives you the same functionality 2 or 3 phone lines on 1 line.

The SR-3 programs itself. One switch lets you choose the option of 2 or 3 phone numbers. Except for this, all you have to do is plug your phone equipment and your phone line into it. It is really that simple.

Smartware learns your distinctive ring voltages the first time you plug it in. it will never misroute a call. The SR-3 is 100% accurate. Dual surge and lightening protection makes the SR-3 dependable and reliable.

If you need a simple distinctive ring router, the SR-3 may be your best choice.

The Stick™ is a 3 device (4 port) automatic call processor that screens and routes all voice, fax, and modem calls to the right equipment every time. Hook up to three telephony devices plus an answering machine on one line.

The Stick screens each call for CNG fax tones, pulse, and touch tones and then routes the call to the appropriate equipment, leaving other phones/devices undisturbed.

Eliminating dedicated fax lines and incorporating the line sharing technology of The Stick adds up to giant savings.