Additional Information
Description | The Multi-Link SR-3 is the simplest and most accurate distinctive ring only line sharing technology in the world today. It offers no programming or options except to choose either 2 or 3 numbers. The SR-3 simply routes your calls to whatever phone devices you plug into it by the phone number (normal or distinctive ring) called. With the SR-3 you can have 2 or 3 phone numbers and pay for only a single line plus the small extra expense for the distinctive ring service from your phone company. The SR-3 will only work for incoming calls if you subscribe to your local phone company’s “distinctive ring service.” It can also be used without subscribing to distinctive ring service for only one incoming device (regular phone number) and up to two outgoing only devices such as modems or credit card terminals. The reason it is always 100% accurate is that it uses Multi-Link’s patented “Smartware” technology that actually learns the ringing patterns from your particular local phone company’s “distinctive ring” service so can never make a mistake. If configured properly with your local phone company it will work with phone company voice mail and call forwarding which are restrictions when using the more common tone detection products that don’t require the distinctive ring option from your phone company. The only restriction is caller-id for the main (normal ring) phone number which will still work with an alternative installation using a simple single line two device adaptor. With this installation you would loose the barge-in protection with busy signal and all your phone calls would ring on a fax or modem call until the device answers. If your only requirement is to route calls by distinctive ring, The SR-3 is a very good choice |
---|---|
Answering Machine Silent Transfer Option | No |
ASAP Programming | No |
Auto Fax / Modem Detect - Distinctive Ring | No |
Barge-in-Protection with Busy Signal | Yes |
Simple Barge-in Protection | Yes |
Cable Phone Company Compatible | No |
Caller-ID Retransmission (store and forward) | No |
Caller-ID Ring Reduction | No |
Caller- ID pass thru mode | No |
Call Forwarding - Distinctive Ring | Yes |
Call Waiting Compatible | Yes |
CO Interface | Ringer Equivalence Number: 0.9 B |
Device Interface | 48 Volt DC |
Dimensions | 5” W 7 1/8" L 2 3/16" H |
Distinctive Ring Auto Routing | Yes |
Distinctive Ring Auto Routing + Caller-ID | No |
Distinctive Ring Semi- Automatic Routing | Yes |
DSL Compatible | Yes |
Emergency Barge In | No |
Emergency Call Manual Override | No |
Extension Detection | No |
Extension Detection - Barge-in Protection | No |
Extension Detection - Call Grab Feature | No |
On-Line Extension Protection | No |
Intercom between Ports | No |
Magic Jack Plus Compatible | No |
Manual Call Transfer | No |
Unlimited Manual Transfer to any Port | No |
Manufacturer | Multi-Link, Inc. |
Modem 1300 Hz Tone Auto Detection | No |
No Answer Transfer Mode | Yes |
Total Devices - Excluding Answer Device | 3 |
Programmable Rings for individual Ports | No |
Programmable Rings to Ports | No |
Protected Hook Flash | No |
Pulse Tone Detection - for rotary phones | No |
Remote Diagnostics and Programming | No |
Rings to Answer Option | No |
Programmable Security Access Codes | No |
Security Access Code for VOICE Port | No |
Security Access Code for MODEM Port(s) | No |
Security Acess Codes to Any Port | No |
Security Access Modem Routing | No |
Semi-Automatic (Passive) Call Routing | Yes |
Unlimited FREE Toll Free Tech Support | 8 hour / 5 day |
Tone Detaction Timer | No |
Total Ports - Including linked ports. | 3 |
Touch Tone Detection - for modern phones | No |
Unanswered Call - Auto Transfer to any port | No |
Unanswered Call - Auto Transfer to Fax | No |
Phone Company Voice Mail Compatible in Distinctive Ring Mode | Yes |