All FaxSwitches - Free Comparison Engine - Free Shipping - Free Support - Call Toll Free 1-866-337-0965


Be the first to review this product

Availability: In stock


Quick Overview

The FAXJ-1000 is a 4 device (4 port) dual function voice, modem or fax switch.

The FAXJ-1000 is a versatile phone/data/fax switch. It automatically routes calls via fax CNG tone, central office distinctive ring, or touch tones included in the dial string by the calling party. The FAXJ-1000 offers full manual transfer capabilities.

The Internal Call mode (intercom) lets you create an “internal” call from one port of the FAXJ-1000 to any other port.

The FAXJ-1000 stores and retransmits caller ID information so that it is truly caller ID compatible.

The FAXJ-1000 lets you have up to 4 distinctive ring numbers or 1 number for up to 4 phone connected devices or a combination of both on one line for the phone(s), fax, answering machine, modem or any device(s) that you choose.

FAXJ-1000 Front View

  • FAXJ-1000 Front View

Product Attachments

View FileFaxJack Manual    Size: (2.03 MB)

FaxJack Owners Manual

Additional Information


The FaxJ-1000 is a multi-function industrial 4 port phone switch that allows any four analog devices to share a single line. It routes calls via CNG tone, distinctive ringing, and touch tones sent by calling device or manually. It provides a realistic ring-back tones while re-ringing selected device.

You can transfer from one port to another as often as may be required during the same call in all modes including the intercom mode. Caller ID information is stored and retransmitted during transfer. Its ports are balanced to prevent noise on long runs.

The FaxJ-1000 has automatic privacy (barge-in protection) eliminates interruptions on both in and outbound calls. It also has an emergency barge-in (call interrupt) feature that allows one device to override all other connected devices.

All in and outbound calls are routed to the phone port during a power failure. The FaxJ-1000 has surge protection on both power and phone line.

The FAXJ-1000 is designed to be wired at the Demarcation Point (the point where the phone line comes into the building) and all wiring is connected to screw terminals instead of normal RJ-11 jacks.

Each input on the FJ-1000 has two spring loaded post (one for the positive and ne negative) for phone line, phones, answering machine. fax, and modem. The included modular jacks ( to plug in your phone, fax, etc.) each have two wires that you will need to put through a hole in the posts on the FJ-1000 and release the spring to hold them in place.

It sounds complicated but it is actually very easy to plug everything in. You simply insert the wire from the plug-in jack through the hole in the post and let go of the spring-loaded cap.

Before we started including the installation kit with FJ-1000, we received many returns because it was too hard the average person to hook up. Since we started including the installation kit, we rarely have any returns. The kit makes it super easy to install.

Answering Machine Silent Transfer Option No
ASAP Programming No
Auto Fax / Modem Detect - Distinctive Ring Yes
Barge-in-Protection with Busy Signal Yes
Simple Barge-in Protection Yes
Cable Phone Company Compatible Yes
Caller-ID Retransmission (store and forward) Yes
Caller-ID Ring Reduction Yes
Caller- ID pass thru mode Yes
Call Forwarding - Distinctive Ring Yes
Call Waiting Compatible Yes
CO Interface Ringer Equivalence Number: 0.6 B
Device Interface No
Dimensions 5.25” L x 3.6” W x 1.75” H
Distinctive Ring Auto Routing Yes
Distinctive Ring Auto Routing + Caller-ID Yes
Distinctive Ring Semi- Automatic Routing Yes
DSL Compatible Yes
Emergency Barge In Yes
Emergency Call Manual Override No
Extension Detection No
Extension Detection - Barge-in Protection No
Extension Detection - Call Grab Feature No
On-Line Extension Protection No
Intercom between Ports Yes
Magic Jack Plus Compatible No
Manual Call Transfer Yes
Unlimited Manual Transfer to any Port Yes
Manufacturer Viking Electronics
Modem 1300 Hz Tone Auto Detection No
No Answer Transfer Mode Yes
Total Devices - Excluding Answer Device 4
Programmable Rings for individual Ports No
Programmable Rings to Ports No
Protected Hook Flash No
Pulse Tone Detection - for rotary phones No
Remote Diagnostics and Programming No
Rings to Answer Option Yes
Programmable Security Access Codes Yes
Security Access Code for VOICE Port No
Security Access Code for MODEM Port(s) Yes
Security Acess Codes to Any Port No
Security Access Modem Routing Yes
Semi-Automatic (Passive) Call Routing Yes
Unlimited FREE Toll Free Tech Support 8 hour / 5 day
Tone Detaction Timer No
Total Ports - Including linked ports. 4
Touch Tone Detection - for modern phones Yes
Unanswered Call - Auto Transfer to any port No
Unanswered Call - Auto Transfer to Fax Yes
Phone Company Voice Mail Compatible in Distinctive Ring Mode Yes

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Call toll free 1-866-337-0965 or 217-337-0965 for more information or to order by phone.